Sunday, April 27, 2008

Puller Card Tutorial- Part Three

1/ Once the tag is in, turn your card over and place your "backer" piece over the opening you've cut in the paper.

2/ Stick the "backer" piece onto the paper. I normally use a tape runner to stick on my cards however for this I only use double sided tape. I use this because you need to make sure there is no "sticky" on the underside of the backer piece which may catch the tag when its pulling in or out.

3/ Turn your paper back over and test your tag to make sure it pulls in and out smoothly. You can see here the effect of having the tag the same colour as the "backer" piece.

4/ Stick you paper piece onto your pre folded card (the photos a little wonky sorry!)

..see final part of tutorial..

No comments: